Menu

HYDRAULIC CYLINDERS

hydraulic cylinders photo Utility Welded Cylinders-Type Bushing Type Clevis Type Welded Through Hole Type Adjustable Female Clevis Type TIE-ROD TYPE 2500 PSI WP TIE-ROD TYPE 3000 PSI WP Inverted Telescopic TYPE SNOW PLOW TYPE CYLINDERS COMPONENTS SEAL KITS SENSOR CYLINDER TYPE

MOTORS

motors photo Gerolor Motors-Overview Small Displacement Motors Low Speed High Torque Motors - GEROLOR MOTORS ACCESSORIES STEERING UNITS Gear Motors PISTONS MOTORS

POWER UNITS

power units POWER UNITS / POWER PACK KIT MOTOR & PUMP COMBINATION SNOW PLOW UNITS

Electric Motors

electric motors photo

PUMPS

pumps photo ALUMINUM GEAR PUMPS VANE PUMPS PISTON PUMPS NEW HAND PUMPS PUMPS CLOSED LOOP

Valves, SUBPLATES & MANIFOLDS

valves photo Directional Valves - Monoblock Type Directional Valves - Sectional Type PROPORTIONAL DIRECTIONAL VALVES CABLES & LEVERS HANDLES & LEVERS Solenoid Operated DIRECTIONAL VALVES Modular Valves MANIFOLD BLOCKS SOLENOID VALVES Electric Flow Diverters HANDLES Manual Flow Diverters HIGH PRESSURE BALL VALVES CHECK VALVES & VELOCITY FUSES HOLDING VALVES RELIEF VALVES PRESSURE CONTROL VALVES FLOW CONTROL VALVES

DIVIDERS

dividers photo Flow DIVIDERS - CARTRIDGE TYPE FLOW DIVIDERS GEAR TYPE

ACCUMULATORS

accumulators photo ACCUMULATORS PISTON ACCUMULATORS - ACCESSORIES

FILTERS

filters photo Return Filters HIGH PRESSURE FILTERS

ACCESSORIES

acessorioes photo Strainers BREATHERS TANK ACCESSORIES SWITCHES, FLOW METERS ELECTRICAL SWITCHES BELLHOUSING & COUPLINGS

RESERVOIRS

reservoirs photo Reservoirs & tanks
hydraulics cylinder

HYDRAULIC CYLINDERS

motors

MOTORS

power units

POWER UNITS

Electric motors

ELECTRIC MOTORS

Pumps

PUMPS

valves

VALVES

dividers

DIVIDERS

accumulators

ACCUMULATORS

filters

FILTERS

accessories

ACCESSORIES

reservoires

RESERVOIRS

HYDRAULIC CYLINDERS

Utility Welded Cylinders - Type

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

Utility Welded Cylinders - Bushing Type

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

Utility Welded Cylinders - Bushing Type

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

Utility Welded Cylinders - Clevis Type

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

Utility Welded Cylinders - Clevis Type

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

Utility Welded Cylinders - Clevis Type

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

Utility Welded Cylinders - Clevis Type

All seals are top grade/first quality North American made All components are CNC machined for higher accuracy and conformity Quality controlled in China by qualified Canadian technicians 100% tested. All cylinders are submitted to static and dynamic pressure tests to recommended specifications.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

UTILITY Cylinders THROUGH HOLE TYPE • 3000 psi WP

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

UTILITY Cylinders THROUGH HOLE TYPE • 3000 psi WP

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

UTILITY Cylinders THROUGH HOLE TYPE • 3000 psi WP

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

Utility Cylinders THROUGH HOLE TYPE • 3000 psi WP

All seals are top grade/first quality North American made All components are CNC machined for higher accuracy and conformity Quality controlled in China by qualified Canadian technicians 100% tested. All cylinders are submitted to static and dynamic pressure tests to recommended specifications

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

UTILITY Cylinders THROUGH HOLE TYPE • 3000 psi WP

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

ADJUSTABLE FEMALE CLEVIS TYPE • 3000 psi WP

* asae = american society of agriculture engineers designates an industry mounting standard for 8” and 16” stroke cylinders 

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

ADJUSTABLE FEMALE CLEVIS TYPE • 3000 psi WP

* asae = american society of agriculture engineers designates an industry mounting standard for 8” and 16” stroke cylinders 

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

ADJUSTABLE FEMALE CLEVIS TYPE • 3000 psi WP

All seals are top grade/first quality North American made All components are CNC machined for higher accuracy and conformity Quality controlled in China by qualified Canadian technicians 100% tested. All cylinders are submitted to static and dynamic pressure tests to recommended specifications

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

HYDRAULIC tie - rod cylinders - 2500 psi wp

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

HYDRAULIC tie - rod cylinders - 2500 psi wp

* asae = american society of agriculture engineers designates an industry mounting standard for 8” and 16” stroke cylinders 

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

HYDRAULIC tie - rod cylinders - 2500 psi wp

All seals are top grade/first quality North American made All components are CNC machined for higher accuracy and conformity Quality controlled in China by qualified Canadian technicians 100% tested. All cylinders are submitted to static and dynamic pressure tests to recommended specifications.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

HYDRAULIC tie - rod cylinders - 3000 psi wp

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

HYDRAULIC tie - rod cylinders - 3000 psi wp

* asae = american society of agriculture engineers designates an industry mounting standard for 8” and 16” stroke cylinders 

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

HYDRAULIC tie - rod cylinders - 3000 psi wp

* asae = american society of agriculture engineers designates an industry mounting standard for 8” and 16” stroke cylinders 

* NPT PORTS ARE ALSO AVAILABLE. NOTE : COLUMN LOAD IS THE MAXIMUM PUSHING LOAD SUGGESTED USING A MINIMUM SAFETY FACTOR OF 2 AND BASED ON A PIN TO PIN MOUNTING CALCULATION.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

HYDRAULIC tie - rod cylinders - 3000 psi wp

All seals are top grade/first quality North American made All components are CNC machined for higher accuracy and conformity Quality controlled in China by qualified Canadian technicians 100% tested. All cylinders are submitted to static and dynamic pressure tests to recommended specifications.

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

inverted telescopic cylinders

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

snow plow hydraulic cylinders - 2500 psi wp

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

cylinders components

NITRO Hydro Custom is not responsible for incorrect results obtained with figures in this document. Information is for reference only. 

SEAL KITS

linear transducer equipped cylinder

Hydro Custom series are designed specifically for mobile hydraulic application:

  • Live cylinder positioning feedback.
  • Adaptable to the new mechatronic engineering.
  • Available WITH internal, external, and parallel design.
  • High vibration/shock resistance.
  • Parallel series can be integrated to existing systems.k.

motors

GEROLOR MOTORS OVERVIEW

The hydraulic motors have an advantage of small volume, high efficiency, low noise, etc. and can be used in a wide field of application such as: Construction, Agricultural, Plastic, Mining, Material Lifting, Forestry, Lawn and turf, Machine tools and stationary, Marine, etc.

BMM
Up to 879 rpm Up to 3845 lbf.in

BMM is a mini-motor with high speed capabilities.

BM1
Up to 879 rpm Up to 3845 lbf.in

BM1 is a small volume, spool valve type motor, with optional side load bearing design. 

Available in H (Eaton) and S (Danfoss) ports.

BM2 / BM2W
Up to 879 rpm Up to 3845 lbf.in

BM2 is a medium volume, spool valve type motor, with optional side load bearing design. Available in H (Eaton) and S (Danfoss) ports. 

BM2W Wheel motor is a recessed mounting flange, with radial bearing design, which can bear a greater load.

BME
Up to 336 rpm Up to 9824 lbf.in

BME motor has advanced geroler gear set design,they are suited for high pressure high efficiency,low speed applications.It can Keep high volume efficiency,long working life .

BM5 / BM5S
Up to 799 rpm Up to 6370 lbf.in

BM5 is a large volume, disc valve, high pressure motor, with radial ball-bearings design and can bear greater load. BM5S Bearingless motor is a Short motor design without bearings, for gearbox assembly applications.

BMT
Up to 12958 lbf.in

BMT is our largest volume disc valve high pressure motor with radial ball-bearings design which can bear greater load and is shorter than our BM6.

BM6 / BM6S
Up to 775 rpm Up to 3852 lbf.in

BM6 is a large volume, disc valve, high pressure motor, with radial ball-bearings design and can bear greater load, and has higher torque capabilities than our BM5. BM6S Bearingless motor is a Short motor design 

BM6S Bearingless motor is a Short motor design without bearings, for gearbox assembly applications. *see Motor catalogue

BMV
Up to 17813 lbf.in

BMV is a disc valve, high pressure motor, with radial ball-bearings design and efficient performance which can bear greater load than BMT. Its figuration is bigger than BMT.
*see Motor catalogue

Small Displacement Motors & Accessories

  • BMM series motor is A mini-motor with high speed, very compact design, spool valve, economical type motor.

    • CHARACTERISTIC FEATURES
  • Compact design of spool and gear set, which provide mini volume, high power DENSITY and low weight
  • Credible design for shaft seal, which can bear high pressure and be used in parallel or in series.
  • Direction of shaft rotation and speed can be controlled easily and smoothly

LOW SPEED HIGH TORQUE MOTORS

  • BM1 series motor is a small volume, spool valve gerolor gear set, economical type motor.

    • CHARACTERISTIC FEATURES
  • Compact design of spool and gear set, which provide small volume, high power and low weight.
  • Direction of shaft rotation and speed can be controlled easily and smoothly.
  • Best efficiency and economy in medium loaD applications.
  • Standard shaft seals rated at 1987 PSI.
  • New, on many series, high pressure shaft seals up to 2900 PSI

LOW SPEED HIGH TORQUE MOTORS

  • BM1 series motor is a small volume, spool valve gerolor gear set, economical type motor.

    • CHARACTERISTIC FEATURES
  • It adopts the gerolor design. Has higher efficiency than our BM1 series.
  • Credible design for shaft seal, which can bear high pressure and can be used in parallel or in series application.
  • Direction of shaft speed can be controlled easily and smoothly.
  • Standard shaft seals rated at 1987 PSI.
  • New, on many series, high pressure shaft seals up to 2900 PSI

LOW SPEED HIGH TORQUE MOTORS



  • BMEW WHEEL MOUNT - 391-301x-F

  • BME 6 HOLES MAGNETO - 391-001xF

  • BME series motor has advanced geroler gear set design,they are suited for high pressure high efficiency,low speed applications. It can Keep high volume efficiency,long working life.

    • CHARACTERISTIC FEATURES
  • Advanced geroler gear set design, low pressure of start-UP,high EFFICIENCY.
  • High pressure applications, high torque.has needle bearings design, it can bear high axial and radial forces.
  • Advance high speed distribution flow design, automatically compensate in operating, high volume efficiency, run smoothly at low speed
  • Standard shaft seals rated at 1987 PSI.
  • New, on many series, high pressure shaft seals up to 2900 PSI.

LOW SPEED HIGH TORQUE MOTORS



  • BM5 is a large volume, disc valve, high pressure motor with radial bearings design and can bear greater load.

  • High pressure shaft seal up to 2900 PSI AVAILABLE.


LOW SPEED HIGH TORQUE MOTORS



  • BMT is a large volume disc valve, high pressure motor, with radial ball-bearings design, and can bear greater load.

    • CHARACTERISTIC FEATURES
  • The motor can be used in high pressure and high torque
  • Advanced design in disc distribution flow,which can provide improved performance at low speed.
  • The valve can automatically compensate for the wear, so the volumetric efficiency is high.
  • Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications.

LOW SPEED HIGH TORQUE MOTORS



  • BM6

  • BM6S

  • BM6 is a large volume, disc valve, high pressure motor, with radial ball-bearings design and can bear greaterload, and has higher torque capabilities than our BM5. 

    • CHARACTERISTIC FEATURES
  • The motor can be used in high pressure and high torque .
  • Advanced design in disc distribution flow,which can provide improved performance at low speed.
  • The valve can automatically compensate for the wear, so the volumetric efficiency is high.
  • Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications.

LOW SPEED HIGH TORQUE MOTORS





  • BMV is a disc valve, high pressure motor, with radial ball-bearings design and efficient performance which can bear greater load than BMT. Its figuration is bigger than BMT.

    • CHARACTERISTIC FEATURES
  • The motor can be used in high pressure and high torque .
  • Advanced design in disc distribution flow,which can provide improved performance at low speed.
  • The valve can automatically compensate for the wear, so the volumetric efficiency is high.
  • Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications.

MOTOR WITH INTEGRATED BRAKES

BM2B BRAKE MOTOR

BM2B brake motor is designed with brake device, shuttle valve, internal control oil loop. Compact design for small volume and easy installation.




BM6B Brake motor

BM6B motor is a BM6 with multi-disc brake which releases using hydraulic pressure. The motor has the same work performance as a regular BM6 when the brake is released.




ZD80 HYDRAULIC BRAKES TO INSTALL ON MOTORS

BM6B motor is a BM6 with multi-disc brake which releases using hydraulic pressure. The motor has the same work performance as a regular BM6 when the brake is released.



    CHARACTERS:
  1. Multi-disc brake type
  2. Compact Design
  3. Excellent performance
  4. ZD Hydraulic Brakes can be independently used without motors
  5. Low noise
  6. Easy to install

Motors Accessories



STEERING UNITS



Gear Motors



Piston Motors



POWER UNITS


POWER PACKS


Our power units follow the same vigorous production and assembly processes as the rest of our products. The Hydro Custom power units are used in various applications.

    FEATURES AND BENEFITS
  • Choice of configurations of multiple components such as pumps, valves, motors and tanks.
  • Experienced advisers in hydraulic circuit conception that will help you with the design of powers units according to your needs and requirements.
  • Power units can be fitted with blocks manifold designed to your specifications and manufactured in our workshops.
  • Mounting and testing of power units in a clean environment and without contamination, according to procedures established by highly qualified technicians.
  • Manufacturing customized solutions or series are possible taking into consideration the time of execution, the amount and the budgetary.
  • Price constraints.
  • 3D drawings, hydraulic and electrical plans and reports of tests (flow, pressure, speed, etc.) upon request.
  • Variety of standard power units distributed in our three warehouses across North America.
  • Several points of service in North America with hydraulic spare parts.
  • Well studied Quality/Price Ratio in order to provide you with the best possible offer.

ELECTRIC Motors

POWER PACKS




direct mount "PUMP-motor ASSEMBLIES"




PUMPS

PUMPS OVERVIEW

Aluminum Gear Pumps



Vane Pumps




PISTON Pumps


new bent axis piston pumps


NEW HAND PUMPS


PUmps closed loop

CLOSED LOOP TPV1000 & TPV1200

CLOSED LOOP TPV3600 & TPV4300

CLOSED LOOP TPV5000 & TPV9000

VALVES

Directional Valves Monoblock type

Directional Valves Sectional Type

AVAILABLE SECTIONS FROM 1 TO 12 SPOOLS

Proportional Directional valves

CABLES & LEVERS - HYDRAULIC VALVES

HANDLES & LEVERS - OTHER APPLICATIONS

SOLENOID OPERATED DIRECTIONAL VALVES

Modular Valves

MANIFOLD BLOCKS

Solenoid Valves

Electric Flow Diverters

HANDLES

MANUAL FLOW DIVERTERS

High Pressure Ball Valves

Check Valves & Velocity Fuses

Holding Valves

RELIEF VALVES

PRESSURE RELIEF VALVES

Pressure Control Valves

Flow Control Valves

DIVIDERS

Flow Dividers Cartridge Type

Flow Dividers Gear Type

Accumulators

ACCUMULATORS & ACCESSORIES     

FILTERS

Return Filters Spin-On Type

Return FilterS

High Pressure Filters

ACCESSORIES

Strainers

Return FilterS

Breathers

Tank Accessories

Switches, Flow Meters, 

Pressure Gauges & Transducers

ELECTRICAL SWITCHS

Bellhousings & Couplings

RESERVOIRS

RESERVOIRES & TANKS

Fancy display heading

NITRO 2020 © copyright all rights reserved

Nitro @copy; all rights reserved